Dry Electrostatic Precipitators
Designed to remove dry particulate matter, such as dust and ash, from industrial exhaust streams. They work by passing dirty gas between electrically charged plates and collecting the particles on those plates.
The Unicon Edge
in Electrostatic Precipitation
- Ionization
- Migration & Collection
- Robust Construction
- Particle Discharge
- Customizable Designs
- Technical Support
Unicon's Electrostatic Precipitators excel with unique performance features
Lower emission
Energy Efficiency
Ease of Maintenance
Advanced Controls
Our types of Electrostatic
Precipitators
Wet Electrostatic Precipitators
Used for removing wet and sticky particles like oil, tar, or paint from gas streams. They operate similarly to dry ESPs but use moisture to help collect the particulate matter.
Plate Electrostatic Precipitators
These use a series of flat plates to collect particles. They are commonly used in power plants because they can handle large volumes of gas and high particulate concentrations.
*Other Industry —
Cement: Kiln, Mills, Cooler;
Iron & Steel: Sintering, Pelletization, Sponge Iron Kiln, Cast House, Stock House;
Biomass fired boilers;
Waste to Energy plants;
Pulp & Paper: Recovery Boiler, Lime Kiln;
Non-Ferrous- Smelter, Converter;
Oil & Gas: FCCU etc.
Cement: Kiln, Mills, Cooler;
Iron & Steel: Sintering, Pelletization, Sponge Iron Kiln, Cast House, Stock House;
Biomass fired boilers;
Waste to Energy plants;
Pulp & Paper: Recovery Boiler, Lime Kiln;
Non-Ferrous- Smelter, Converter;
Oil & Gas: FCCU etc.
| Parameter | Data |
|---|---|
| Application | Power Plants - Boilers and Heaters, *Other Industries |
| Capacity (Power Plant MW) | 5 to 600 |
| Gas Temperatures (°C) | 70 - 400 |
| Gas Flow Rate (m3/s) | 5 - 1500 |
| ESP inlet dust loading (g/Nm3) | 0.2 - 250 g/Nm3 |
| Guaranteed ESP outlet emission (mg/Nm3) | 10 - 200 (suitable design for ESP as pre-collector), filterable PM only |
| PM Collection Efficiency | Up to 99.95% |
| Availability | Up to 98% |
Special features of our ESP(s)
- Proven Particulate Matter Removal 10mg/Nm3
- High Availability
- Low Maintenance
- Reduced breakdown
- Most Economical Design
- Lower Operating Cost
- Optimum Performance under Varying Load Conditions
- Optimum Power Consumption in Operation
- Next Generation Electronic Controllers
- Minimum Horizontal Space Occupation in the Project
- Our ESP design will incorporate CFD for even distribution of gas inside ESP to ensure the complete utilization of collecting area.
- Unicon is having Expertise in Both Tumbling Type and Top Rapping System.
- We offer Spiral/Rigid Emitting Electrodes to ensure the proper Corona generation inside the ESP for better collection efficiency.
- Individual Collecting electrodes are suspended from top to form a curtain. This also ensures that the Collecting system is not bulky and thus ensures good rapping characteristics.
- Unicon have supplied more than 300 numbers of ESP for Boiler. By the years, Unicon had accrued expertise in installing ESP for Boiler which are using fuels like Coal, Bagasse, Spent wash, Slop, Dolochar, Pet Cock, Rice Husk, Rice Straw, Wood Chips, Saw Dust, Chilly Spent, etc,.
Product Specifications
*Other Industry —
Cement: Kiln, Mills, Cooler;
Iron & Steel: Sintering, Pelletization, Sponge Iron Kiln, Cast House, Stock House;
Biomass fired boilers;
Waste to Energy plants;
Pulp & Paper: Recovery Boiler, Lime Kiln;
Non-Ferrous- Smelter, Converter;
Oil & Gas: FCCU etc.
Cement: Kiln, Mills, Cooler;
Iron & Steel: Sintering, Pelletization, Sponge Iron Kiln, Cast House, Stock House;
Biomass fired boilers;
Waste to Energy plants;
Pulp & Paper: Recovery Boiler, Lime Kiln;
Non-Ferrous- Smelter, Converter;
Oil & Gas: FCCU etc.
| Parameter | Data |
|---|---|
| Application | Power Plants - Boilers and Heaters, *Other Industries |
| Capacity (Power Plant MW) | 5 to 600 |
| Gas Temperatures (°C) | 70 - 400 |
| Gas Flow Rate (m3/s) | 5 - 1500 |
| ESP inlet dust loading (g/Nm3) | 0.2 - 250 g/Nm3 |
| Guaranteed ESP outlet emission (mg/Nm3) | 10 - 200 (suitable design for ESP as pre-collector), filterable PM only |
| PM Collection Efficiency | Up to 99.95% |
| Availability | Up to 98% |
Unique Features
Special features of our ESP(s)
- Proven Particulate Matter Removal 10mg/Nm3
- High Availability
- Low Maintenance
- Reduced breakdown
- Most Economical Design
- Lower Operating Cost
- Optimum Performance under Varying Load Conditions
- Optimum Power Consumption in Operation
- Next Generation Electronic Controllers
- Minimum Horizontal Space Occupation in the Project
- Our ESP design will incorporate CFD for even distribution of gas inside ESP to ensure the complete utilization of collecting area
- Unicon is having Expertise in Both Tumbling Type and Top Rapping System
- We offer Spiral/Rigid Emitting Electrodes to ensure the proper Corona generation inside the ESP for better collection efficiency.
- Individual Collecting electrodes are suspended from top to form a curtain. This also ensures that the Collecting system is not bulky and thus ensures good rapping characteristics.
- Unicon have supplied more than 300 numbers of ESP for Boiler. By the years, Unicon had accrued expertise in installing ESP for Boiler which are using fuels like Coal, Bagasse, Spent wash, Slop, Dolochar, Pet Cock, Rice Husk, Rice Straw, Wood Chips, Saw Dust, Chilly Spent, etc,.
Clear Skies Ahead
Embark on the journey to superior air quality with Unicon ESPs. Our advanced technology ensures compliance and peace of mind.